drawing number rev 1501 route 34 south farmingdale, nj 07727 title material fscm finish: all dim's in: inches (mm) 83330 this drawing and the contents herein are confidential and the sole property of dialight. reproduction of this drawing or construction of any parts within this drawing are forbidden without the written consent of dialight. +.012 .315 -.004 +0,30 [8 ] -0,10 .157 # .004 [4 # 0,10] .157 # .004 [4 # 0,10] .079 # .002 [2 # 0,05] .069 # .004 [1,75 # 0,10] .138 # .002 [3,5 # 0,05] .039 [1] typ .060 # .004 [1,50 # 0,1] .055 # .004 [1,4 # 0,10] .009 # .001 [0,23 # 0,03] .098 # .003 2,49 # 0,07 [ ] .200 [ 5,09 ] .063 [ 1,6 ] .043 [ 1,1 ] .026 [ 0,65 ] typ .024 [ 0,6 ] .016 [ 0,4 ] .059 [ 1,5 ] .051 [ 1,3 ] .016 [ 0,4 ] .100 [ 2,54 ] .011 [ 0,28 ] .126 [ 3,2 ] .063 [ 1,6 ] .059 [ 1,5 ] 75 75 30 30 80 80 0.42 0.42 -40 to +85 $ c -30 to +85 $ c operating characteristics at 25 $ c ambient forward voltage @i = 20 ma f (v) 112 112 2.0 2.4 10 567 577 scale: 15.000 tolerances: unless otherwise specified fractions: # 1/64 decimals (.xx): # .01 decimals (.xxx): # .005 angles: # 3 $ b 3.2mm x 1.6mm x 1.1mm reverse mount led; rohs compliant C-17741 sheet 1 of 1 family table: - - rev ecn no revisions drn ckd app date a new release klj jlc n.o. 6-30-09 b added pcb layout ajf klj no 7-24-09 absolute maximum ratings at 25 $ c ambient color units red green power dissipation mw dc forward current ma peak forward current (1/10 duty cycle, 0.1ms pulse) ma derate linearly from 25 $ c ma/ $ c reverse voltage 5 v storage temperature $ c operating temperature $ c ir soldering temperature, for 10 sec 260 $ c color luminous intensity @i = 20 ma f (mcd) reverse current ( a) dominant wavelength (nm) peak wavelength (nm) viewing angle (deg) min typ max typ max max min typ max typ typ red 28 55 2.0 2.4 10 631 639 130 green 28 45 571 574 cutout non-plated thru-hole recommended solder pad layout cathode user feed direction package dimensions of tape and reel notes: 1. lens: water clear 2. led chip: alingap red & green 3. leads are gold (au) plated finish. 4. packaging: -602f suffix means 20 pcs sample strip -607f suffix means 3000 parts/reel, 7 inch reel 5. moisture sensitivity level 3. 6. tape and reel leds may require re-taping after twelve months. 7. dialight part numbers: 597-7703-602f, 597-7703-607f 8. this assembly contains electrostatic discharge sensitive devices (esds). maintain all precautionary measures during assembly, handling, and storage in accordance with ipc-a-610. pcb bottom top view soldered bottom pin 4 red cathode led schematic pin 1 green cathode pin 2 pin 3 rohs compliant 597-7703-60xf part numbers with the "f" suffix ending are rohs compliant. reel and bag packaging are marked with "rohs compliant" label or equivalent markings. these parts can be used with rohs reflow profile. parts can be wave soldered, dip soldered or hand soldered using typical lead-free soldering process with max 260c temp. for 5 sec. 10 sec max 60 sec max 60-120 sec 217 $ c 6 $ c/sec max 255-260 $ c 3 $ c/sec max time temperature recommended rohs solder profile 150 $ c 200 $ c 3 $ c/sec max direction of light green cathode id p.c.b. molding body (lens) cathode mask pin 1 pin 2 pin 3 pin 4 attention: observe precautions for handling electrostatic sensitive devices
|
